Steel Coil Slitting Line / Cut to Length Machinery

Economical Cut to Length Machinery. We offer a complete selection of Cut to Length/Slitting and combination lines, varying from very basic economy priced light duty items through to high output sophisticated production lines.

COMPONENT VARIATION

Items to be incorporated in a line can be customised from a wide range of possible components including the following categories;

Slitter
Recoiler
Edge Trim Winders
Offload Capstain
Part coil Rewind
Stacker
Peeler
Punch

Straightener
Uncoiler
Coil Car
Recoiler
Notcher
Leveller
Feeder
Shear
Beader

Cut to Length Machinery

FULL COMBINATION CUT TO LENGTH / SLITTING LINE WITH COIL CAR, DECOILER, SNUBBER, LEVELLER, SLITTER, SHEAR, PART COIL RECOIL.

Economy Steel Coil Processing

A low cost range of equipment is available for thickness of material up to 1 mm. This range includes steel coil slitting, cut to length and combination units. Especially suitable for light guage users seeking the benefits of operating from coil without the usual capital outlay.

Standard Slitting Line Construction

The main fabricated steel frame is engineered to a high standard. The power units are self contained within the machine construction with compact dimensions requiring very little operating space.

Cut to Length Line

Lines can either be compact version of loop feed (or separate straightener) version, the latter often being required when pre painted or plastic coated materials are used.

Standard capacities available vary up to 1500mm wide.

Coil weights up to 15 tonne.

Maximum thickness 1.5, 2 or 3 mm.

Minimum thickness 0.45 mm

Other capacities can be quoted on request.

Steel Coil Slitting Line

Quick Change Slitting Line

A unique computerised slitting head can be incorporated into lines. This involves a unique design of slitter knife, which can be automatically engaged/disengaged and traversed under power. All functions are governed by a central control so memorised set ups can be accessed automatically causing minimum down times in setting up.

Various Possibilities

Cut coils to desired widths (min 50 mm)up to 5 slits in maximum thickness capacity.

Recoil edge trim by means of option winders.

Cut coils to desired length.

Recoil the uncut part of the coil. This operation can be done whilst cutting your sheets with the guillotine on remaining part of coil.

Tramsfom the coil by cutting it into multiple widths and lengths.

BACK TO CUT TO LENGTH OR SLITTING LINES