Sheet Metal Guillotine Shears

Model SMT is a motor driven plate guillotine shear with a cutting capacity of max. 1,5 mm sheet thickness (related to 3100 mm working length). Handling is very easy: Put the sheet onto the table, push it between the cutting bars and start the process with the foot switch - that's all.

The guillotine machine frame is a sturdy welded steel design. The cutting bar is driven by eccentric and a noiseless gear motor. On each side of the cutting table there are rectangular gauges with a scale of 400 mm (stainless steel). During the cut a mechanical hold-down bar with non-skid ebonite lining holds the part.

An extensible support bar in front of the machine enlarges the area of support to 920 mm.

All bearings and guideways are maintenance-free.

Available Capacities:

• 1000 mm x 3.5 mm.
• 1540 mm x 2.5 mm.
• 2040 mm x 2.5 mm.
• 2540 mm x 2 mm.
• 3100 mm x 1.5 mm. 

Model MSB is a motor driven plate guillotine shear with a cutting capacity of max. 2,0 mm sheet thickness (related to 3100 mm working length). Handling is very easy: Put the sheet onto the table, push it between the cutting bars and start the process with the foot switch - that's all.

Model MSB is a sturdy welded steel design with a reinforced cutting bar driven by a crank drive.

On each side of the cutting table there are rectangular gauges with a scale of 400 mm (stainless steel). During the cut a mechanical hold-down bar with non-skid ebonite lining holds the part.

An extensible support bar in front of the guillotine shear machine enlarges the area of support to 920 mm.

All bearings and guideways are maintenance free.

Available Capacities:

• 1000 mm x 4 mm.
• 1540 mm x 3.5 mm.
• 2040 mm x 3 mm.
• 2540 mm x 2.5 mm.
• 3100 mm x 2 mm. 

MSC 310 bv Guillotine Shear

Model MSC is a motor driven plate guillotine shear with a cutting capacity of max. 3,0 mm sheet thickness (related to 3100 mm working length). Handling is verly easy: Put the sheet onto the table, push it between the cutting bars and start the process with the foot switch - that's all.

The shear machine frame is a computer optimized welded steel design. The cutting bar is driven by crank drive and a noiseless gear motor on each side of the machine.

Along the machine table there are sheet support covers of stainless steel with a snap lock system. Between the sheet support covers there adjustable front support arms with T-slots, 1000 mm scales and gauge fingers for easy front gauging.

On each side of the cutting table there are rectangular gauges with stainless steel scales of 1000 mm . During the cut a mechanical hold-down bar with non-skid ebonite lining holds the part. A sheet support behind the machine returns the part to the front and delivers it to an integrated sheet catching device.

All bearings and guideways are maintenance free. Model MSC comes standard withan easy blade gap adjustment on both side stands.

Upper and lower blade consist of high-quality steel with two edges.

Available Capacities:

• 2040 mm x 4 mm.
• 2540 mm x 3.5 mm.
• 3165 mm x 3 mm.
• 4040 mm x 2.5 mm.
• 4540 mm x 2 mm.